Textile note
Kravet Fabric Buying Guide: A Scenario-Based Approach for Small, Mid-Size, and Contract Orders
2026-11-06 · Lucia Bianchi
-
There's no universal right way to buy Kravet fabric
-
Scenario A: Small studio or first-time buyer (under 20 yards)
- Scenario B: Mid-size firm with recurring orders (20–100 yards)
-
Scenario C: Large contract or commercial project (100+ yards)
-
How to figure out which scenario you're actually in
-
The single highest-ROI move, regardless of scenario
There's no universal right way to buy Kravet fabric
I've been managing fabric procurement for a mid-size design firm for about 8 years. When designers ask me "how do I buy Kravet fabric without getting burned?" I have to resist the urge to give a one-line answer. Because the truth is, it depends—and I mean that in a specific way, not a cop-out way.
What I've learned from tracking roughly $180,000 in cumulative fabric spending across about 200 orders (give or take—I'd have to pull the exact number from our system) is that there are three distinct scenarios. Each one has different minimums, different pricing structures, and different pitfalls.
The three scenarios:
- Scenario A: Small studio or one-off orders (under 20 yards)
- Scenario B: Mid-size recurring orders (20–100 yards)
- Scenario C: Large contract or commercial projects (100+ yards or custom specs)
Which one you're in changes almost everything about how you should approach the purchase. Let me break each one down.
Scenario A: Small studio or first-time buyer (under 20 yards)
This is where I see designers leave the most money on the table—usually because they're worried about being "too small" to matter.
Let me clear up one misconception right away: Kravet's standard minimums on most in-stock Kravet upholstery lines are typically in the 1–2 yard range for cut yardage. That's not a barrier. The barrier is often perceived, not real.
When I was starting out, I needed about 6 yards of a blue velvet for a settee project—a blue velvet settee for a boutique hotel lobby, nothing massive. I almost didn't call the showroom because I thought they'd laugh at the order size. They didn't. The rep treated it exactly like the 150-yard orders I place today. That stuck with me.
Three things that work in this scenario:
1. Lead with samples. Most Kravet showrooms send memo samples for the cost of shipping. Use them. Check the color match carefully—especially for saturated colors like blue velvet or deep burgundy. If you're matching a specific paint or brand color, ask for the Delta E comparison. Industry standard tolerance for brand-critical colors is Delta E < 2. Between 2–4 is noticeable to trained eyes; above 4 is visible to most people. Reference: Pantone Color Matching System guidelines.
2. Combine orders where it makes sense. If you have two or three small projects happening in the same season, combining them into one Kravet upholstery order can sometimes get you to a better price tier. I've saved 8–15% this way on smaller quantities. Not life-changing, but it adds up.
3. Don't apologize for the size. Small orders are how relationships start. Any rep who makes you feel bad about a 5-yard order isn't someone you want to be working with when the same client asks for a 200-yard commercial spec two years from now.
Small doesn't mean unimportant—it means potential. I've seen a $200 sample order turn into a $14,000 annual account. The reps who understand that are the ones worth building with.
My experience here is based on about 200 mid-range orders. If you're working at the ultra-luxury end or with a completely different client profile, your mileage might differ significantly.
Scenario B: Mid-size firm with recurring orders (20–100 yards)
This is where the actual cost optimization happens—and where I spend most of my time.
The channel comparison that matters
At this volume, list price should be a starting point, not the final number. Here's a concrete example from Q2 2024. We needed about 60 yards of Kravet outdoor fabric for a terrace project. I compared three paths:
- Direct through our Kravet rep: $47/yard, 3-week lead time
- Through a fabric reseller with a trade account: $52/yard, 4-week lead time
- Through an online trade-only platform: $44/yard, 6-week lead time
We went with the rep at $47/yard. Why? The project's install date was fixed, and 6 weeks wasn't going to work. I have mixed feelings about this—we left about $180 on the table compared to the slowest option. But I've seen "cheap" outdoor fabric arrive with sun-fading issues, and a redo would have cost closer to $2,000. Sometimes paying 6% more for certainty is the right call.
Two patterns I've noticed at this order size
1. Specialty fabrics don't follow the same discount structure. Products like glass mesh fabric or contract-grade sheers are often made in smaller batches. Your volume discount on those might be smaller than expected. Ask about pricing for each fabric type specifically, not just your overall account tier.
2. If you're doing any in-house treatment, be careful with the DIY coating route. This comes up when someone asks about how to buy acrylic resins for textile coatings—usually because they're considering buying uncoated fabric and handling the FR or stain treatment themselves. We did this once for a contract job. Saved about $3/yard. But the liability shifted to us, and the documentation became fragmented. For most mid-size projects, it's simpler and safer to buy pre-finished performance fabric from Kravet directly.
One thing that changed my approach: tracking annual spend by fabric type, not just total spend. Turns out we were overestimating our volume in some categories and underestimating in others. Once I had real numbers, I had a much stronger case for a pricing tier review.
Scenario C: Large contract or commercial project (100+ yards)
At this scale, buying fabric becomes contract negotiation. And that's a good thing—if you're prepared.
For projects at 100+ yards, especially commercial installs—hotels, restaurants, office lobbies—Kravet will often quote a project price that's below their standard trade price. But they won't offer it unless you ask clearly.
What I mean is: say something like "We're sourcing for a 140-yard commercial installation with a fixed completion deadline. Can you provide project pricing?" That sentence, in my experience, is the difference between list price and real pricing.
Two more things that matter at this scale:
1. Get testing documentation upfront. Commercial projects usually need Wyzenbeek or Martindale abrasion results, colorfastness data, and FR certification. Kravet provides these—but the timing matters. I once waited until week 6 of an 8-week project to request documentation for a 200-yard order. It existed, but it took 9 days to get to us. The client was not thrilled.
2. Reserve dye lots for phased installs. If your project is going in over multiple phases, ask about reserving fabric from the same dye lot. This is especially important for saturated colors—deep blues, reds, certain outdoor fabrics that can vary more across lots. Kravet doesn't always guarantee this, but they'll work with you if you ask early enough.
Back to the acrylic question one more time: some design teams specify uncoated high-performance fabric and arrange third-party acrylic resin treatment for acoustic panels and privacy screens. The results can be great, but the logistics are real—you're adding a middleman to the supply chain, and the testing documentation gets fragmented. For most commercial projects, specifying a Kravet performance fabric directly (Crypton, Sunbrella) is more straightforward and carries less risk.
How to figure out which scenario you're actually in
Here's what I've noticed: designers tend to underestimate their own volume. Of the teams I've worked with, most initially positioned themselves as Scenario A even when their spending patterns suggested B or C.
Use this checklist:
You're probably in Scenario A if:
- You're ordering under 20 total yards per quarter
- You don't have an established trade account or rep
- You're still sampling multiple options and haven't committed to a colorway
You're probably in Scenario B if:
- You have a rep or showroom contact you work with directly
- You're ordering at least once a month
- Your annual Kravet spending is over $15,000
- You can list your last three orders without checking your records
You're probably in Scenario C if:
- You're sourcing for a commercial project with a GC or specifier involved
- You need testing documentation before placing the order
- You're dealing with phased deliveries or dye lot reservations
- Someone above your title is asking for "the best price"
If you're between two scenarios—say, 25 yards but only once a year—treat it like Scenario A for the first order, then move to B once the relationship is established. There's no upside to pretending to be bigger than you are.
The single highest-ROI move, regardless of scenario
Stop treating the published price list as final. Every fabric company—Kravet included—has more flexibility than the catalog suggests. The question is whether you're asking about the right things: volume tiers, opening order terms, project pricing, combined shipments, or longer lead times in exchange for lower unit costs.
I built a simple cost calculator that I run every order through now. It factors in base price, shipping, testing costs, redo risk, and time. It takes about 10 minutes per order. It's saved us an estimated $8,400 annually—roughly 17% of our fabric budget—by catching small overcharges and unnecessary rush fees.
You don't need a spreadsheet as elaborate as mine. But you do need to know which scenario you're in before you pick up the phone. That's the real first step.